Montgomery County beam installation
Beam Installation in Montgomery County
Start with the change you want to make.
If a planned layout change raises a support question, describe the rooms involved and the result you are working toward.
- Engineer-coordinated
- Permit support
- Philadelphia & five counties
A structural decision, not a shortcut
The beam has to carry the load correctly—before the wall comes down.
Structural beam installation is the critical step in projects where an existing wall, post, or undersized member can no longer do its job. The new beam redirects roof, floor, and wall loads safely to the supports below it.
That requires the right material, the right dimensions, the right bearing conditions, and the right connections. NK Construction & Design coordinates every part of that process for homeowners throughout Philadelphia, Bucks County, Montgomery County, Delaware County, Chester County, and the Main Line.
Whether you are opening a kitchen, correcting a sagging support member, creating a new structural opening, or planning a full remodel, the work starts with a careful on-site evaluation and a practical structural plan.
Structural focus
Beam installation for the moments when your home needs stronger support.
Load-bearing wall removal, open-concept renovations, beam replacement, structural openings, support posts & footings, and permit & inspection coordination.
- 01
Load-bearing wall removal
Replace a structural wall with a properly engineered beam so rooms can open up without compromising the structure above.
- 02
Open-concept renovations
Create the wider kitchen, dining, and living connections older Philadelphia-area homes were not originally designed to provide.
- 03
Beam replacement
Replace aging, damaged, undersized, or poorly modified support members with a solution sized for the actual condition.
- 04
Structural openings
Install beams above new doors, pass-throughs, widened openings, or reconfigured rooms where framing must be safely modified.
- 05
Support posts & footings
Address the supports beneath the beam when new point loads require columns, posts, or additional footing work.
- 06
Permit & inspection coordination
Keep the project documented and organized from engineering through the final municipal inspection.
Choosing the structural member
LVL, steel, or flitch: each beam type solves a different structural problem.
The correct beam is determined by load calculations, span length, ceiling depth, support conditions, and the specific construction of the home—not by a generic package.
LVL beam
Engineered laminated veneer lumber is often the right choice for standard residential spans. It is strong, dimensionally stable, and practical to install in many homes.
- Excellent for many kitchen and living-room openings
- Can be built up to the specified size
- Often easier to handle than steel on site
Structural steel beam
Steel carries greater loads over longer spans and can provide a shallower profile where ceiling height matters or where multiple stories bear above.
- Ideal for demanding load conditions
- Useful when beam depth must be minimized
- Often selected for multi-story or complex projects
Flitch beam
A steel-and-wood composite option used in selected conditions where a narrow framing profile is needed with more capacity than solid wood alone.
- Can fit within standard wall framing dimensions
- Useful in certain rowhome configurations
- Specified when the structural condition calls for it
The NK process
A disciplined sequence from first evaluation to final inspection.
- 01
On-site evaluation
We inspect the existing framing, wall or opening, visible support conditions, and practical constraints at the property.
- 02
Engineering coordination
When required, a licensed structural engineer specifies the beam, connections, posts, and any new supports or footing work.
- 03
Permit preparation
We coordinate the documentation and permit process required for Philadelphia or the relevant suburban municipality.
- 04
Temporary support & installation
The structure is properly shored before any load-bearing element is altered. The beam is then set and secured to plan.
- 05
Inspection & finish readiness
Once structural work is complete, the project is prepared for inspections and the next finish phase of the renovation.
What structural work makes possible
A better layout begins with the structure behind it.
In older homes, the best renovation ideas often require a structural solution first. A beam can make it possible to connect a kitchen to a living space, open a closed-off first floor, replace a failing support member, or rework a room that never functioned well.
Our role is to make the structural portion clear, coordinated, and properly executed—so the finished home can feel seamless.
Where we work
Beam installation across Philadelphia and the surrounding counties.
We work with homeowners, property owners, and renovation clients throughout the Greater Philadelphia region.
- Philadelphia
- The Main Line
- Bucks County
- Montgomery County
- Delaware County
- Chester County
- Rowhomes & twins
- Historic homes
- Colonials & suburban properties
Beam installation FAQs
Clear answers before you begin.
When is a steel beam used instead of an LVL beam?
Steel and LVL can both be appropriate structural beam materials, but the choice depends on span, loads, available beam depth, bearing conditions, connections, access, and the surrounding construction. NK Construction & Design coordinates beam selection around the structural requirements of the project so the material fits the load path and the space rather than being chosen by preference alone.
Does structural work in Lower Merion require sealed plans?
Lower Merion’s residential building-permit checklist calls for sealed or signed details for structural work, with an architectural seal acceptable on that checklist. The Township’s current residential guidance also states that plans for structural alterations must be sealed by an Architect or Professional Engineer licensed in Pennsylvania. The exact submission still depends on the defined work, so the permit packet should be confirmed with Lower Merion before filing.
What supports a new structural beam at each end?
A structural beam transfers load to bearing points at its ends, which may require posts, columns, masonry pockets, reinforced framing, or support carried down to suitable structure or foundations below. NK evaluates the complete load path because installing the beam is only part of the work; the concentrated loads created at its ends also need to be supported correctly.
Looking for another answer?
Explore the FAQ hubDiscuss your project
Start with the space and the questions you have.
Tell us what you are planning or what you have noticed. We can begin with the details that matter to your home or property.